ELISA-ONE™ for STAT5

ELISA-ONE for Phospho STAT5 (pY694/pY699)

Specificity

ELISA-ONE for phospho STAT5 (pY694/pY699) are ready to use ELISA kits for the detection of endogenous levels of STAT5 when phosphorylated at Tyr694 and Tyr699.

ELISA-ONE for phospho STAT5 (pY694/pY699) is comprised of a precoated 96 well (12×8 strips) plate and an antibody pair, recognizing the phospho-Tyr694 epitope and the phospho-Tyr699 epitope of STAT5.

The antibody pair recognizes human and mouse STAT5. However, other species should be tested on a case by case basis.

 

ELISA-ONE for Total STAT5

Specificity

ELISA-ONE for total STAT5 are ready to use ELISA kits for the detection of endogenous levels of STAT5 irrespective of phosphorylation status.

ELISA-ONE for total STAT5 is comprised of a precoated 96 well (12×8 strips) plate and an antibody pair, recognizing two invariants epitopes of STAT5.

The antibody pair recognizes human and mouse STAT5. However, other species should be tested on a case by case basis.

 

ELISA-ONE for Phospho & Total STAT5

Specificity

ELISA-ONE for phospho and total STAT5 are ready to use ELISA kits for the detection of endogenous levels of STAT5 in its phosphorylated and unphosphorylated form.

ELISA-ONE for phospho and total STAT5 is comprised of a precoated 96 well (12×8 strips) plate and two antibody pairs, recognizing the phospho-Tyr694 and phospho-Tyr699 epitopes and an invariant epitope of STAT5.

The antibody pairs recognize human and mouse STAT5. However, other species should be tested on a case by case basis.

 

Technical Specifications

GenBank Accessions
STAT5A
NP_003143
STAT5BNP_036580

 

Species Cross-reactivity

Tested: Human, mouse

Kit Contents

  • 1x 96 well (12×8 strips) CaptSure assay plate
  • 1x adherent plate seal
  • 1x Lysis Buffer (5X)
  • 1x Enhancer Solution
  • 1x Wash Buffer (10X)
  • 1x Detection Reagent
  • 1x Stop Solution
  • 1x Lyophilized Positive Control Lysate
  • 1x Capture Antibody Reagent 1
  • 1x Capture Antibody Reagent 2 (phospho / total target kits only)
  • 1x Detection Antibody Reagent 1
  • 1x Detection Antibody Reagent 2 (phospho / total target kits only).

 

STAT5 Signaling Pathway

STAT5A and STAT5B (collectively known as STAT5) are two very closely related proteins. Although encoded by different genes, STAT5A and STAT5B share 96% identity at the protein level. Similarly to other STAT proteins, STAT5A and STAT5B are activated by tyrosine phosphorylation, usually by JAK proteins, at Tyr694 and Tyr699, respectively.

 

STAT5A and STAT5B show differential, cell specific regulation, with STAT5A expression predominant in mammary tissue, while STAT5B expression is more abundant in muscle and liver tissues. STAT5 plays an integral role in immune cell development and regulation and is an important mediator of IL‐2 and IL‐15 signaling in regulatory T cells.

 

DIAGRAM_ELISA-ONE_STAT5 pathway

 

 

STAT5 References

Gouilleux F, Wakao H, Mundt M, Groner B. Prolactin induces phosphorylation of Tyr694 of Stat5 (MGF), a prerequisite for DNA binding and induction of transcription. EMBO J. 1994 Sep 15;13(18):4361–9.

Groner, B., von Manstein, V. Jak Stat signaling and cancer: Opportunities, benefits and side effects of targeted inhibition (Review). Mol Cell Endocrinol. 2017 Aug 15;451:1–14. doi: 10.1016/j.mce.2017.05.033. Epub 2017 May 30.

Olayioye, MA., Beuvink, I., Horsch, K., Daly, JM., Hynes, NE. ErbB receptor-induced activation of stat transcription factors is mediated by Src tyrosine kinases. J Biol Chem. 1999 Jun 11;274(24):17209–18.

Rädler, PD, Wehde BL., Wagner, KU. Crosstalk between STAT5activation and PI3K/AKT functions in normal and transformed mammary epithelial cells (Review). Mol Cell Endocrinol. 2017 Aug 15;451:31–39. doi: 10.1016/j.mce.2017.04.025. Epub 2017 May 8.

 

 

Phosphorylated and total protein level

DIAGRAM_ELISA-ONE_Phospho STAT5 graph

Treatment of A431 cells with EGF triggers phosphorylation of STAT5 at Tyr694 and Tyr699 but does not affect the total level of STAT5 (top panel).

 

ELISA-ONE vs CompetitorsDATA_ELISA-ONE_vs_Competitors

ELISA-ONE demonstrates a wider dynamic range and lower background compared with commercially available ready to use competitor ELISA kits.

 

Intra & inter plate variability

 

DATA_ELISA-ONE_Intra_Iner Plate CV

Mean, standard deviation (SD) and coefficient of variance (%CV) were measured among the same plate (n=24) and four different plates.

Frequently Asked Questions (FAQs) for ELISA‐ONE

1. Can I use a different ELISA plate to the one that is supplied?

ELISA‐ONE microplates are specific to ELISA‐ONE and cannot be substituted with any other type of 96 well microplate. ELISA‐ONE microplates, which rely on our CaptSure™ technology, are optimized to provide an active surface for binding the immunocomplex by means of the interaction between the CaptSure antibody precoated onto the plate and the CaptSure peptide conjugated to the capture antibody.

2. How are ELISA-ONE microplates supplied?

ELISA‐ONE microplates are supplied in a 12×8 strip well plate. The plate format allows the user to use only the number of the strip wells needed, without incurring additional waste when performing small scale experiments.

3. How are ELISA-ONE microplates stored?

ELISA‐ONE microplates can be stored at +4°C or room temperature. If stored at +4°C, the strip wells should be allowed to equilibrate to room temperature prior to opening the pouch to minimize condensation.

4. I did not use all the strip wells supplied with my ELISA-ONE kit. How should I store the remaining strip wells?

Unused strip wells should be removed from the frame, placed back in their foil pouch, sealed with tape, and stored at +4°C or room temperature. Unused strip wells should be used within one month from the date of opening.

5. Does the ELISA-ONE microplate need to be blocked before use?

No, the ELISA-ONE microplate does not need to be blocked. ELISA-ONE plates are pre-coated and ready to use. However, for optimal performance, rinse the wells with sterile H2O to remove preservatives prior to use.

6. Which cell types are compatible with ELISA-ONE?

ELISA-ONE can be used for many adherent and nonadherent cell types, including transfected cell lines and primary cells. However, because kinase expression and phosphorylation conditions can vary from one cell line to another, some cells may be more amenable than others. Parameters such as stimulation time and cell number should be optimized for each cell line used. When using overexpressed intracellular targets, ensure full‐length expression of the target for correct binding of the antibody pair. The concentration of cell lysate should be optimized to ensure that the signal is within the working range of the assay.

7. Is cell culture supernatant compatible with ELISA-ONE?

ELISA-ONE works with many matrices, although sensitivity may be affected. Compatibility should be assessed on a case by case basis.

8. What is the 5X Lysis Buffer composition?

The 5X Lysis Buffer provided for the ELISA-ONE is a 5X stock that contains a combination of detergents, phosphatase inhibitors, salts and buffers. The 5X Lysis Buffer can be supplemented with Enhancer Solution to yield a versatile lysis solution that can be applied to many cells and tissues.

Lysing cells can yield to viscous lysate solutions difficult to handle, especially when concentrated lysates are required. Care should be taken when transferring lysates in order to minimize pipetting related variability.

9. Can I add extra components to the Lysis Mix?

Supplementation of the Lysis Mix with additional components (e.g. protease inhibitors, chelating agents, detergents) should be tested on a case by case basis for compatibility with ELISA‐ONE assays.

10. Are other lysis buffers (e.g. RIPA buffer) compatible with ELISA-ONE?

Optimal performance is ensured with the 5X Lysis Buffer provided with ELISA-ONE. Compatibility with other cell lysis buffers should be assessed on a case by case basis as these buffers could denature the ELISA-ONE antibody pair and affect the phosphorylation state of the target as well as its epitopes. Furthermore, strong detergents such as SDS are not recommended for use with ELISA‐ONE as they can also denature proteins.

11. Do I need a centrifugation step to lyse my cells?

Centrifugation is not required as the Lysis Mix effectively solubilizes the cells.

12. I have a limited amount / volume of sample. What is the lowest volume of lysate I can add on the ELISA-ONE plate?

ELISA‐ONE is optimized for 50μL of both cell lysate and Antibody Mix. However, if lysate availability is limited, as little as 25μL of lysate can be used, in combination with 50μL of Antibody Mix for a total volume of 75μL.

13. How do I measure the concentration of protein in the lysate?

We recommend using a BCA assay to measure the concentration of protein in the lysate, as this is compatible with the ELISA-ONE Extraction Buffer.

14. What does the Control Lysate consist of?

Control Lysates are lyophilized cell lysates, prepared from various cell types and stimulated to express the protein of interest. The Control Lysates are intended for use as a positive control for the assay only and should not be used for the absolute protein quantification.

15. The solution turned cloudy after the addition of the Antibody Mix. Does this affect the assay performance?

No, it does not. Cloudiness has sometimes been observed but has no effect on assay performance.

16. Are the antibody pairs sold separately?

No, the antibody pairs are sold exclusively within the ELISA-ONE kits.

17. The absorbance value of my ‘neat’ / undiluted sample is lower compared with absorbance values for the serial dilutions. Can you please explain what is happening?

You are experiencing a phenomenon known as the ‘hook effect’, which is an interference that affects many immunoassays. The hook effect happens when the concentration of the analyte is too high. This results in saturation of the capture and detection antibodies, and thus prevents the formation of the immunocomplex. The hook effect is often observed with tissue lysates. If experiencing the hook effect, it is recommended to perform serial dilutions of your sample until you find the linear range.

You may also be interested in

Your preferred local currency is now